Industrial Valve

Approx. Rs 1,000 / PieceGet Latest Price

• Pressure Rating:125 PSIG / 150 PSIG / 300 PSIG / 600 PSIG   
• Size:1 to 24 inch

Approx. Rs 500 / PieceGet Latest Price

Approx. Rs 1,000 / PieceGet Latest Price

• The globe valve is used for throttling flow control. 
• Shut off is accomplished by moving the disc against the flow stream rather than across it as in the case with a gate valve.
• The globe valve is an excellent valve to use for on-off service, but is highly suited for frequent cycling and control of fluids anywhere in amount or volume between the open and closed positions.

• This is a valve which entails multiple turns during hand operation.
• It is basically a linear action valve that has a piston or disk which seats on a single shaped seat or flat.
• They are mainly used to control the opening and closing of fluid flow.
• In the plumbing industry, globe valves are used to tightly seal when fully closed.
• This controls high pressure fluid streams in pipes.
• Fluid pressures vary from time to time while flowing.
• The valves have a stem that is vertically positioned in the body of fluid flow to control the changes in pressure.
• It has a globe-shaped body that is mainly separated by an inner baffle.
• It is the baffle which controls the flow and has two parts: ring shaped seat and the flat plug.
• We offer metal seatings so that the seating stress must not only high but also circumstantially uniform to achieve the desired degree of fluid tightness.

• Body & Bonnet made from high quality casting with liberal sections. The castings are precision machined for high performance
• Rising Stem & Rising Hand Wheel Construction.
• Die moulded Graphite (Grafoil) Packing Rings, controlled clearance between stem, gland and bonnet bushing for guaranteed low emissions and also suitable for higher temperature.
• Deep stuffing box is providing for tightness and maximum long packing life.
• Swinging Eye Bolts facilitate easy access to the stuffing box.
• Back seating feature facilitates repacking of the stuffing box on line with the valve in fully open position.
• Seat Ring Screwed in to the body (Replaceable Type) or integral type.
• Stellited Disc, Seat Ring & Back Seat can also be offered on special request.
• Higher Pressure & Higher Size Valves are provided with Thrust Bearings and also with Gear drive arrangements.

Special Options:

• Angle & Y Type Design Available
• Parabolic, Regulating, Guided & Soft Seating Disc (Plug) available
• Extended Bonnet design for low temperature and cryogenic services.
• Gland Seal Design (Water Seal) With Lantern Ring
• Non-Rising Hand Wheel on special request
• Bolted Bonnet / Pressure Seal Bonnet
• Gear / Pneumatic Cylinder / Electrical Actuator Operated
• Locking Arrangement
• With NACE MR 0175
• Tailor Made Valve