Sasthan Engineers

Gowriwakkam, Chennai, Tamil Nadu

GST No. 33ABZFS9628N1ZZ

Send Email
0804895369278% Response Rate
Search

Home » Our Products » Check Valve


Check Valve

We are a leading Manufacturer of wafer check valve, swing check valve, dual plate check valve and cast iron wafer check valve from Chennai, India.

Wafer Check Valve

REQUEST CALLBACK

Wafer Check Valve
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1,500 / PieceGet Latest Price

Product Brochure
Product Details:
Size42 inch
Suitable ForHorizontal, Vertical Line
Body DesignSingle Plate
Design StandardAPI 6D
Pressure Rating150 PSIG
BrandJD Controls
Body MaterialCast Iron, Cast Steel, Forged Steel etc

Design:
  • It has short face-to-face dimensions and low weight allows a simple space saving installation between the companion flanges.
  • The valves are suitable to mounting between weld neck or slip on type companion flanges of different standards.
  • They are specially developed for applications where a low-pressure loss is essential.

Principle:
  • Opening and closing of the valve will take place at an extremely low-pressure difference over the valve disc.
  • The eccentric disc shaft combination with the disc seat guarantees a positive shut off returning media.
  • Wafer check valves are becoming the preferred type of check valve for most applications, due to their compact design and relatively low cost.
Yes! I am interested

Swing Check Valve

REQUEST CALLBACK

Swing Check Valve
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3,000 / PieceGet Latest Price

Product Details:
Size42 inch
BrandJD Controls
MediaWater
End ConnectionFlanged End
MaterialCarbon Steel, Stainless Steel, Mild Steel
Temperature100 deg C
Pressure Rating20 Kg/Cm2
Seat LeakageZero Leakage
Suitable ForHorizontal, Vertical Line
Design StandardBS 1868

About Product:

  • They are bolted cover design and above pressure seal design.
  • It is designed for long service life and maintenance free operation. 
  • It has a full-flow area body and is equipped with a disc arm with dual precision pins for optimum disc connection and protection against damage due to vibration.

Principle:
  • A swing check valve consists of a flap or disc of the same diameter as the pipe bore, which hangs down in the flow path.
  • With flow in the forwards direction, the pressure of the fluid forces the disc to hinge upwards, allowing flow through the valve.
  • Reverse flow will cause the disc to shut against the seat and stop the fluid going back down the pipe.
  • In the absence of flow, the weight of the flap is responsible for the closure of the valve; however, in some cases, closure may be assisted by the use of a weighted lever.

Salient Features:
  • Body & Cover made from high quality casting with liberal sections. The castings are precision machined for high performance.
  • Body Seat Ring & Disc machined to close Tolerances providing smooth action and accurate seating.
  • Seat Ring Screwed in to the body are replaceable type. Seal welded type Seat Ring & Integral Seat cab also be offered on special request.
  • Stellited Seat Ring & Disc also be offered on special request.
  • In built wear life for long duration in service.

 

Special Option:

  • Body Type: Single Thin Plate, Short Type
  • Suitable For Horizontal and Vertical Mounting
  • Shorter overall length, mounting requires minimum space.
  • Low Pressure Drop
  • Easy to Install
  • Less Weight
  • Size:1 to 42 inch   
  • Temperature:-25 to +200 deg C    Pressure Rating:125 PSIG / 150 PSIG / 300 PSIG   
  • Seat Leakage:Zero Leakage,Tight Shut Off    
Yes! I am interested

Dual Plate Check Valve

REQUEST CALLBACK

Dual Plate Check Valve
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1,500 / PieceGet Latest Price

Product Details:
MaterialCast Iron
Usage/ApplicationIndustrial
MediaWater
BrandJD Controls
ColorBlue
Size42 inch
Pressure Rating125 PSIG
Design StandardBS 1868

Yes! I am interested

Cast Iron Wafer Check Valve

Cast Iron Wafer Check Valve
  • Cast Iron Wafer Check Valve
  • Cast Iron Wafer Check Valve
Approx. Rs 950 / Piece
Yes! I am interested


 
X


Explore More Products

Contact via E-mail
Contact via SMS
A. Periya Samy (CEO)
Sasthan Engineers
Plot No.4 & 5,F4, Ramar Street, Santhosapuram,Gowriwakkam
Chennai - 600073, Tamil Nadu, India
Call Us: 
Call Response Rate: 78%
Share Us :



Home  |   About Us   |  Our Products  |  Site Map  |   Contact Us

© Sasthan Engineers. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Sasthan Engineers